-
Tile Adhesive C-500
C500 is a cement based water resistant tile adhesive with fast setting, quick strength and self curing properties. It contains special chemicals including re-dispersible polymers. It is suitable for fixing wall and floor tiles. It provides excellent adhesion, good mechanical strength and can be used for internal and external applications. It can be used on ceramic tiles (group IIIBS5385-1:2009) having water absorption (E) more than 10% (E>10%). C500 white is advised to be used on stain prominent tiles.
Available Colors: GREY -
Flowflex Brass Compression Gate Valves
Flowflex Gate valves are installed in systems to isolate flow, and should not be used as control or regulating valves. By turning the stem, the gate inside the valve moves up and down to either interrupt or facilitate the flow of the system.
Gate valves are typically chosen where minimum pressure loss is required, as when fully open, there is very little to interrupt flow. Furthermore, and advantage of using a Gate Valve is that its slow process of closing mitigates the effects of water hammer in your system.
-
Plaster Mix M Designed for Manual Plastering For Areas Not Accessed By Machine Applications
MANUAL APPLIED PREMIXED PLASTER
ر.س 1.60 excl. Tax -
Pre Mix Plasters – Conmix CP 2
CP2 is a dry pre mix, cement plaster/render for internal and external use. This cement plaster is an ideal substrate for paint, wallpaper or decorative plasters. CP2 can be applied with a suitable plastering machine or by hand in accordance to BSEN 13914-1 & 2 onto prepared concrete surface, block work as well as most mineral backgrounds
Available Colors: GREY ر.س 1.65 excl. TaxPre Mix Plasters – Conmix CP 2
ر.س 1.65 excl. Tax -
Premix Plaster PLS222 Sprayable Premixed Int/External Plaster & Render For AAC Block Walls
Premix Plaster PLS222 is a cement based plastering material composed of hydraulic binders (OPC), selected graded aggregates, fi bers, and special additives.
ر.س 2.00ر.س 2.20excl. TaxPremix Plaster PLS222 Sprayable Premixed Int/External Plaster & Render For AAC Block Walls
ر.س 2.00ر.س 2.20excl. Tax -
Vetoflex PU780 High Performance Weather Resistant Sealant For In/Outdoor Construction Applications
HIGH PERFORMANCE, ELASTOMERIC, SINGLE COMPONENT POLYURETHANE SEALANT (FORMERLY KNOWN AS SAVETO PU1)
ر.س 2.50 excl. Tax -
Vetonit Crack Filler For Ext/Internal Wet and Dry Static Cracks Up To 4mm, Blowholes and Minor Undulations
Use for filling the static cracks up to 4mm, blowholes, and minor undulations, etc.
Apply it externally & internally, in wet and dry conditions, onto the walls & ceilings such as bathrooms & kitchens.
Apply on concrete and plastered surfaces that are smooth and on precast concrete surfaces.ر.س 3.20 excl. Tax -
Vetoset CA540 (F40) Int/External Tile Adhesive Works With Most Tiles and Flexible Substrates
PROFESSIONAL GRADE ADHESIVE TO WORK WITH LARGE TILE FORMAT & MULTIPLE TYPES OF TILES (C2TE S1)
ر.س 3.30 excl. Tax -
Spatter Dash SB Internal & External Scratch Coat For Plasters
Spatter Dash CB a cement-based coat composed of hydraulic binders, selected aggregates, and high-performance additives. It is supplied as a dry powder in pre-weighed bags ready to use on-site, which requires only the addition of clean water to produce easily workable mortar. Spatter Dash CB is a high-quality product for applications on cement board and non absorbing surfaces and ceilings.
Spatter Dash SB is supplied in 50Kg Bag.
ر.س 3.50ر.س 4.00excl. TaxSpatter Dash SB Internal & External Scratch Coat For Plasters
ر.س 3.50ر.س 4.00excl. Tax -
Tile Adhesive C-800(M)
C800 (M) is a dry pre mix, water resistant, cement based thin bed adhesive for the fixing granite, vitrified tiles, glass mosaic, glass bricks, and ceramic wall and floor tiles. It is suitable for internal and external use and complies to ANSI A 118.4:2005 and BS EN 12004:2017. C800 (M) has a long open time with excellent adhesion and workability. It consists of White Portland cement, oven dried, processed sand and chemical additives including vinyl acetate/ethylene copolymer redispersible powder.
Available Colors: GREY ر.س 3.53 excl. TaxTile Adhesive C-800(M)
ر.س 3.53 excl. Tax -
Vetonit Putty WR High Quality Water Resistant Ex/In Putty to Repair Surface Undulations
WATER RESISTANT HIGH QUALITY CEMENTITIOUS PRE-MIXED PUTTY
ر.س 4.00 excl. Tax -
Vetorep CR520 High Strength Ready to Use Structural Repair Mortar
HIGH STRENGTH STRUCTURAL REPAIR MORTAR
Vetorep CR520 is a single component polymer modified fibered cementitious structural repair mortar that is ready to use and only requires adding water on site. Once mixed, the product becomes a thixotropic mortar that is hand applied to repair demanding structural repair while being compatible with host concrete. Vetorep CR520 is composed of a blend of hydraulic cement, carefully selected and graded aggregates, fibers, and special additives to give it its unique properties.
Vetorep CR520 is supplied in a 25 Kg Bag. Yield: 14 Liters.
ر.س 4.00 excl. TaxVetorep CR520 High Strength Ready to Use Structural Repair Mortar
ر.س 4.00 excl. Tax
Newsletter
Subscribe to get information about products and coupons
© 2023 Nabni.com | All Rights Reserved
We provide safe payment options
