Vetonit Crack Filler For Ext/Internal Wet and Dry Static Cracks Up To 4mm, Blowholes and Minor Undulations

Coverage: 0.8 – 1.0kg/m²/1mm Thickness

In stock

Use for filling the static cracks up to 4mm, blowholes, and minor undulations, etc.
Apply it externally & internally, in wet and dry conditions, onto the walls & ceilings such as bathrooms & kitchens.
Apply on concrete and plastered surfaces that are smooth and on precast concrete surfaces.

  Ask a Question

OMR 3.20 excl. Tax

Vetonit Crack Filler For Ext/Internal Wet and Dry Static Cracks Up To 4mm, Blowholes and Minor Undulations

Coverage: 0.8 – 1.0kg/m²/1mm Thickness

Share

Vetonit Crack Filler is composed of a fine filler, high-quality white cement, bonding chemicals, and special additives. It is supplied as a dry powder in pre-weighed bags ready to use on-site; it only requires the addition of clean water to produce a cohesive mix. Vetonit Crack Filler is a high-quality product for repairing static cracks, in addition to providing a very smooth surface finish for subsequent application of paints, decorative coatings & wallpapers. Vetonit Crack Filler can be applied in crack thickness from scrape coat to 4mm.

USES
Use for filling the static cracks up to 4mm, blowholes, and minor undulations, etc.
Apply it externally & internally, in wet and dry conditions, onto the walls & ceilings such as bathrooms & kitchens.
Apply on concrete and plastered surfaces that are smooth and on precast concrete surfaces.

ADVANTAGES

  • Factory controlled pre-blend that ensures consistently high quality.
  • Requires only the addition of water on-site at the time of use.
  • Suitable for external & internal applications.
  • The cured material is water-resistant.
  • Easy to apply with a superior finish achieved in minimum efforts.
  • Strong adhesion properties on a variety of substrates.
  • Apply to concrete and plastered walls & ceilings.
  • Achieves a very smooth finish.
  • Suitable for humid & dry conditions.

Vetonit Crack Filler is supplied in 20kg Bag.
Consumption: 0.8 – 1.0kg/m²/1mm Thickness

MIXING

For mechanical mixing, add to the mixing container 9.5-11.0 liters of water for each 25Kg bag of Vetonit Crack Filler or 0.57-0.66 litres/1.5kg small bag. Add the powder to the water and mix with a mechanical plaster mixer, or mix using a low-speed electric drill fitted with a suitable paddle for 3-4 minutes until achieving a uniform, lump-free consistency.

Leave the mixed material to stand for 10 min and briefly remix without the addition of water. Mix small batch quantities manually for approx. 1-2 min or until achieving a homogenous mix.

When required, add 0.5 liters of Vetonit Bond 2 to the mixing water and adjust the water requirement for each 25kg bag or 30ml of Vetonit Bond 2 per 1.5kg bag. Follow the same mixing procedure as above.

Use the mixed material within 2 hours.
Do not add water once the mixed material starts to stiffen or harden.

APPLICATION

Apply Vetonit Crack Filler in two coats for wide and deeper cracks.
Apply Vetonit Crack Filler to the substrate by pressing the filler firmly into the cracks using a flat putty trowel.
After treating cracks with Vetonit Crack Filler, it is recommended to use Vetonit Joint Tape 50mm or 100mm wide. For better adhesion, use Vetonit Bond 2 when fixing the tape.
Use alkali-resistant paints and coatings as a final decorative finish.

Additional information

Weight 20 kg
Be the first to review “Vetonit Crack Filler For Ext/Internal Wet and Dry Static Cracks Up To 4mm, Blowholes and Minor Undulations”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

No more offers for this product!

General Inquiries

There are no inquiries yet.

Delivery
Directly to your project site
7 Days Return
If goods have problems
Secure Payment
100% secure payment
Support
Ready to assist you
Wholesale Service
Send your order through WhatsApp

Main Menu

Chat