Spatter Dash SB Internal & External Scratch Coat For Plasters
In stock
Spatter Dash CB a cement-based coat composed of hydraulic binders, selected aggregates, and high-performance additives. It is supplied as a dry powder in pre-weighed bags ready to use on-site, which requires only the addition of clean water to produce easily workable mortar. Spatter Dash CB is a high-quality product for applications on cement board and non absorbing surfaces and ceilings.
Spatter Dash SB is supplied in 50Kg Bag.
ر.س 3.50ر.س 4.00 excl. Tax (-13%)
Spatter Dash SB Internal & External Scratch Coat For Plasters
![](https://nabni.com/wp-content/uploads/2021/10/187_product_img_486.png)
Spatter Dash SB cement-based key coat composed of hydraulic binders, selected sand aggregates, and high-performance additives. It is supplied as a dry powder in pre-weighed bags ready to use on-site, which requires only the addition of clean water to produce easily spray-able mortar. Spatter Dash SB is a high-quality product for multipurpose applications and contains a special bonding agent.
- Factory-controlled pre-blend ensures consistently high quality.
- Requires only the addition of water on-site at the time of usage.
- Manual or spray machine application or by hawk & trowel techniques.
- Superior workability.
- Excellent adhesion on a variety of substrates.
- Internal & external applications.
- Suitable for humid & dry conditions.
- Suitable for vertical & ceiling surfaces.
Mixing
Add to the mixing container 11.5-14.0 liters of water for each 50Kg bag of Spatter Dash SB. Add the powder to the water and mix with a mechanical plaster mixer or low-speed electric drill fitted with a suitable paddle for 3-4 minutes until achieving a uniform, lump-free consistency.
Blend Spatter Dash SB manually for small quantities and maintain the correct amount of powder to water. Mix for approximately 1-2 minutes until achieving a homogeneous mix.
Application
Preferably, apply Spatter Dash SB in a single coat application to achieve the desired rough thickness of 4-6 mm. Apply mixed material using a mechanical spray or manual spatter machine or hawk & trowel technique. Cover 95-100% of the surface area that will be plastered.
Allow the installed Spatter Dash SB to remain undisturbed for at least 48 hours.
Curing
Cure Spatter Dash SB by spraying the applied material surface with water every 12hrs for a minimum of 3 days. During hot & dry conditions, allow curing for a minimum of 5 days. It will help to obtain high mechanical strengths and minimize the risk of surface cracks.
Cleaning
Clean all tools immediately after finishing with water. Clean hardened materials mechanically.
-
Vetoflex PU780 High Performance Weather Resistant Sealant For In/Outdoor Construction Applications
Sold By: The White Blocksر.س 2.50 excl. TaxSold By: The White BlocksVetoflex PU780 High Performance Weather Resistant Sealant For In/Outdoor Construction Applications
ر.س 2.50 excl. Tax -
Plaster Mix M Designed for Manual Plastering For Areas Not Accessed By Machine Applications
Sold By: The White Blocksر.س 1.60 excl. TaxSold By: The White BlocksPlaster Mix M Designed for Manual Plastering For Areas Not Accessed By Machine Applications
ر.س 1.60 excl. Tax -
Vetoset CA540 (F40) Int/External Tile Adhesive Works With Most Tiles and Flexible Substrates
Sold By: The White Blocksر.س 3.30 excl. TaxSold By: The White BlocksVetoset CA540 (F40) Int/External Tile Adhesive Works With Most Tiles and Flexible Substrates
ر.س 3.30 excl. Tax
-
ر.س 3.00 excl. Tax
-
ر.س 75.00 excl. Tax
-
ر.س 0.18 excl. Tax
-
ر.س 0.10 excl. Tax
-
ر.س 0.15 excl. Tax
-
ر.س 0.10 excl. Tax
-
ر.س 0.33 excl. Tax
-
ر.س 35.00 excl. TaxSold By: Muna Noor
1.5 Inch Pelican Rain Gun Irrigation Sprinkler, Model No.: HT-42G
ر.س 35.00 excl. Tax -
ر.س 14.00 excl. Tax
Reviews
There are no reviews yet.