Subscribe to get information about products and coupons
MULTI-PURPOSE BONDING AGENT & ADMIXTURE
Ready Mix Bond is a single component acrylic-based bonding agent for cementitious materials. It is water-based, specially formulated to enhance bonding properties and improve the mechanical strengths of plaster mixes when incorporated with mixing water. Ready Mix Bond reduces shrinkage cracks during the early stages of cement hardening by minimizing surface water loss in freshly applied mixes. Ready Mix Bond is ideal for use with a variety of sand/cement-based mixes. Ready Mix Bond can be diluted on site with potable water for desired applications.
Packaging: 20 Ltr / Gallon
OMR 10.00 excl. Tax
Use neat Plastering Bond without dilution. Apply Plastering Bond using a brush or spray directly onto the substrate. If using a hand pump, spray at a rate of 4-6 m2/liter.
While the bonding agent is wet to tacky, follow immediately by applying plaster, screed, render, mortars, etc.
Note: Plastering Bond should remain tacky when applying top coat finishes.
Ready Mix Bond is supplied in 20 liters Containers.
Actual consumption depends on the nature of substrate, method of application, and wastage.
COLOR & APPEARANCE
Milky white liquid
Add 3 parts of Ready Mix Bond with 1 part of water. Mix thoroughly to obtain uniform consistency liquid. Add the diluted Ready Mix Bond to pre-blended sand/cement plaster, mortar, or other dry mixes. Mix for 3-4 minutes using a mechanical mixer at low speed.
There are no inquiries yet.