Subscribe to get information about products and coupons
SINGLE COMPONENT PENETRATING WATERPROOFING SYSTEM FOR CONCRETE
Vetoproof CM741 provides a total and permanent waterproofing solution to water leakage, ingress, or seepage in concrete structures or any cementitious substrates due to its unique, surface-applied penetrative capillary waterproofing system. Vetoproof CM741 works through internal crystallization that seals the concrete’s pores and hairline cracks, thus effectively blocking water passage. The active chemical that made up Vetoproof CM741 catalyzes to reactivate the crystallization process every time water penetrates the structure through newly formed capillaries, therefore, ensuring permanent water tightness.
Vetoproof CM741 is supplied in 25Kg Bags.
OMR 6.00 excl. Tax
Yield: 1.6 kg/m²/1mm thickness
If the use of masonry brush is the application method, mix 7-7.5 liters of water with 25kg of Vetoproof CM741, while when using a power-spray gun, prepare a mixture of 8 – 8.5 liters of water with 25kg of the product.
Mix only as much product as necessary and ensure to stir the mixture regularly. If the mixture starts to set, it is not advisable to add more water; instead, re-stir the prepared mixture to reinstate its workability.
Apply Vetoproof CM741 into two coats with the use of a masonry brush or power-spray gun. Make sure to apply the second coat while the first coat is still “green.”
Keep all areas where Vetoproof CM741 is applied damp, protected against direct exposure from sunlight, wind, and frost by covering the area with polythene sheeting, damp hessian cloth, etc., for a period of 5-7 days.
Ensure that the period between applying the first and second layer is between 3 – 4 hours at a temperature of 20°C
There are no inquiries yet.