Decorative Finishing Color Plaster – Vetotouch Graviatto
In stock
Vetotouch Graviatto is a cement-based decorative finish composed of hydraulic binders, selected aggregates, and special additives. It is supplied as a dry powder in pre-weighed bags ready to use on-site, which requires only the addition of clean water to produce easily workable mortar.
ر.س 4.30 excl. Tax
Description
Vetotouch Graviatto is a cement-based decorative finish composed of hydraulic binders, selected aggregates, and special additives. It is supplied as a dry powder in pre-weighed bags ready to use on-site, which requires only the addition of clean water to produce easily workable mortar.
- Factory-controlled pre-blend ensures consistently high quality.
- Requires only the addition of water on-site at the time of usage.
- Provides profiled and scratched finishes.
- Improved workability and curing
- Easy application with uniform workflow enables high productivity and superior finishing.
- Strong adhesion on a variety of substrates.
- Internal and external applications.
- Weather-resistant.
- UV stable pigment provides resistance to fading and eliminates the need for additional paint.
- Suitable for humid and dry conditions.
Mixing
Add to the mixing container 7.5-8.5 liters of water for each 25kg bag of Vetotouch Graviatto. Add the powder to the water and mix with a mechanical plaster mixer or low-speed heavy-duty electric drill fitted with a suitable paddle for 3-4 minutes until achieving a uniform, lump-free consistency. Leave the mixed material to stand for 10min and briefly remix without adding water.
For small batch quantities, mix manually for approx. 1-2min or until achieving a homogeneous mix.
A manual application is considered (not by spray machines), optionally, adding 0.5 to 1.0 liter of Vetobond AB432 to the mixing water and adjusting the water requirement accordingly for each 25kg bag. Follow the same mixing procedure as described above.
Use the mixed material within 30-60 minutes.
Do not add water once the mixed mortar starts to harden.
Application
Apply Vetotouch Graviatto in one or two layers up to 3mm/coat. Allow the first layer to partially dry (30 to 120 minutes depending on weather conditions) before applying the second layer.
After applying the layers using a steel trowel, wait for about 10 – 15 minutes and then use a special plastic trowel to get groove effects. To protect Vetotouch Graviatto, apply Vetoseal XX772 by brush or spray machine after three days of curing.
Curing
It is vital to cure Vetotouch Graviatto surface with clean potable water 2 times a day for 3 days. During hot and dry conditions, extend the curing period for a minimum of 5-7 days. It will help to obtain high physical properties. An acrylic-based curing compound can be used.
To protect the final color look, it is recommended to apply one coat of Saveto Vetoseal product range (contact the technical department for advice).
Cleaning
Clean tools with water before the mortar hardens. After the hardening, remove its residuals mechanically only.
Reviews (0)
More Products
-
Vetoproof AM764 Versatile Waterproofing in Residential and Commercial Construction
Sold By: The White Blocksر.س 18.50 excl. TaxSold By: The White BlocksVetoproof AM764 Versatile Waterproofing in Residential and Commercial Construction
ر.س 18.50 excl. Tax -
Neofil F8 High Performance Waterproof Tile Adhesive For Int/Exterior Applications
Sold By: The White Blocksر.س 3.30 excl. TaxSold By: The White BlocksNeofil F8 High Performance Waterproof Tile Adhesive For Int/Exterior Applications
ر.س 3.30 excl. Tax -
ر.س 8.50 – ر.س 9.50 excl. TaxSold By: The White Blocks
Vetotile Bond Strong Adhesive for Installing Tiles the Traditional Way
ر.س 8.50 – ر.س 9.50 excl. Tax
-
ر.س 3.00 excl. Tax
-
ر.س 75.00 excl. Tax
-
ر.س 0.18 excl. Tax
-
ر.س 0.10 excl. Tax
-
ر.س 0.15 excl. Tax
-
ر.س 0.10 excl. Tax
-
ر.س 0.33 excl. Tax
-
ر.س 35.00 excl. TaxSold By: Muna Noor
1.5 Inch Pelican Rain Gun Irrigation Sprinkler, Model No.: HT-42G
ر.س 35.00 excl. Tax -
ر.س 14.00 excl. Tax
Reviews
There are no reviews yet.