-
SS Metal Lath
Expanded metal lath is extensively used as a background to plaster in order to reinforce against cracks and it is especially useful at joints of dissimilar materials.
Generally DL111 or DL089 lath is used for wall situations and DL161 is used for ceiling work.
ر.س 14.50 excl. TaxSS Metal Lath
ر.س 14.50 excl. Tax -
GI Metal Lath
Expanded metal lath is extensively used as a background to plaster in order to reinforce against cracks and it is especially useful at joints of dissimilar materials. Generally DL111 or DL089 lath is used for wall situations and DL161 is used for ceiling work.
Available Colors : GALVANISED ر.س 2.75 excl. TaxGI Metal Lath
ر.س 2.75 excl. Tax -
BB2 Wall Tie
Catnic wall ties are manufactured from high quality stainless steel wire in accordance with BS EN 10088-2-1.4301 (strip), BS EN 10088-3:2005 min 18/8 composition wire (wire)
-
-
SS – Angle Bead
Designed for two and three coat applications, Standard Angle Bead forms strong and accurate corners resistant to chipping and cracking. Available in Galvanised Steel for internal applications and available in Stainless Steel for external use and high condensation and moisture areas.
ر.س 2.50 excl. TaxSS – Angle Bead
ر.س 2.50 excl. Tax -
GI – Angle Bead
A Catnic angle bead form strong accurate corners which are resistant to chipping cracking whilst providing strength protection against everyday knocks. A Catnic angle bead will help to protect and reinforce plaster where it is most vulnerable.
The Catnic angle bead range on offer have been designed for both internal use and outer plaster uses, manufactured from quality galvanized steel sheet, expanded or perforated mesh.
ر.س 0.65 excl. TaxGI – Angle Bead
ر.س 0.65 excl. Tax -
Pre Mix Plasters – Conmix CP 2
CP2 is a dry pre mix, cement plaster/render for internal and external use. This cement plaster is an ideal substrate for paint, wallpaper or decorative plasters. CP2 can be applied with a suitable plastering machine or by hand in accordance to BSEN 13914-1 & 2 onto prepared concrete surface, block work as well as most mineral backgrounds
Available Colors: GREY ر.س 1.65 excl. TaxPre Mix Plasters – Conmix CP 2
ر.س 1.65 excl. Tax -
Spatter Dash SB Internal & External Scratch Coat For Plasters
Spatter Dash CB a cement-based coat composed of hydraulic binders, selected aggregates, and high-performance additives. It is supplied as a dry powder in pre-weighed bags ready to use on-site, which requires only the addition of clean water to produce easily workable mortar. Spatter Dash CB is a high-quality product for applications on cement board and non absorbing surfaces and ceilings.
Spatter Dash SB is supplied in 50Kg Bag.
ر.س 3.50ر.س 4.00excl. TaxSpatter Dash SB Internal & External Scratch Coat For Plasters
ر.س 3.50ر.س 4.00excl. Tax -
Premix Plaster PLS222 Sprayable Premixed Int/External Plaster & Render For AAC Block Walls
Premix Plaster PLS222 is a cement based plastering material composed of hydraulic binders (OPC), selected graded aggregates, fi bers, and special additives.
ر.س 2.00ر.س 2.20excl. TaxPremix Plaster PLS222 Sprayable Premixed Int/External Plaster & Render For AAC Block Walls
ر.س 2.00ر.س 2.20excl. Tax -
Plaster Mix M Designed for Manual Plastering For Areas Not Accessed By Machine Applications
MANUAL APPLIED PREMIXED PLASTER
ر.س 1.60 excl. Tax -
Vetonit Crack Filler For Ext/Internal Wet and Dry Static Cracks Up To 4mm, Blowholes and Minor Undulations
Use for filling the static cracks up to 4mm, blowholes, and minor undulations, etc.
Apply it externally & internally, in wet and dry conditions, onto the walls & ceilings such as bathrooms & kitchens.
Apply on concrete and plastered surfaces that are smooth and on precast concrete surfaces.ر.س 3.20 excl. Tax -
Vetonit Putty WR High Quality Water Resistant Ex/In Putty to Repair Surface Undulations
WATER RESISTANT HIGH QUALITY CEMENTITIOUS PRE-MIXED PUTTY
ر.س 4.00 excl. Tax
Newsletter
Subscribe to get information about products and coupons
© 2023 Nabni.com | All Rights Reserved
We provide safe payment options
