Vetotouch Textura is a polymer-modified cement-based render coat composed of hydraulic binders, selected aggregates, special pigments, and high-performance additives. It is supplied as a dry powder in pre-weighted bags ready to use on-site, which requires only the addition of clean water to produce cohesive mortar. Vetotouch Textura is a high-quality product and is suitable for external applications. Vetotouch Textura is available in white, Saveto standard colors, and custom colors with minimum order restrictions.

USES

• External and internal building facades.
• As a finish coat for EIFS / ETICS systems.
• On block walls and concrete surfaces.
• On scratch coated overhead surfaces.

ADVANTAGES

• Factory controlled pre-blend ensures consistently high quality
• Requires only the addition of water on-site at the time of usage.
• Uniform color / mass.
• Improved workability and curing
• Easy application with uniform workflow enables high productivity and superior finishing.
• Strong adhesion on a variety of substrates.
• Internal and external applications.
• Weather-resistant.
• UV stable pigment provides resistance to fading and eliminates the need for additional paint.
• Suitable for humid and dry conditions.

Vetotouch Textura supplied in 50Kg Bag.
Yield: 34 Liters.

COLOR & APPEARANCE

Available in white, Saveto standard colors, and custom colors with minimum order restrictions

MIXING

For manual application, add to the mixing container 8-10 liters of water for each 50kg bag of Vetotouch Textura or 12 liters / 50kg bag for machine application. Add the powder to the water and mix with a mechanical plaster mixer or low-speed electric drill fitted with a suitable paddle for 3-4 minutes until achieving a uniform, lump-free consistency.

Leave the mixed material to stand for 10min and briefly remix without adding water.

For small batch quantities, mix the material manually for approx. 1-2 min or when achieving a homogeneous mix.

Apply Vetotouch Textura on smooth surfaces in a single or two coats by trowel application to achieve the desired thickness of 5-20mm.

Apply the mixed material using the hawk and trowel technique. Rod or screed to uniform thickness, not exceeding 20mm for a single coat or 10mm per coat for multiple layers. Press the first layer tight against the surface.

For the second layer, allow the plaster to partially set (60-120 min depending on weather). Apply the second layer as described above.

If the second layer is carried out the next day, spray water the surface.