USES

• On concrete and cementitious substrates.
• Swimming pools.
• Reservoirs and water tanks.
• Canals, harbors, and dams.
• Concrete pipes.
• Tunnels.
• Retaining walls.

ADVANTAGES

• Non-toxic and does not contain any momentary organic components.
• Excellent resistance to freeze-thaw cycles.
• It can be applied even on a humid surface.
• Guarantees permanent water sealing of concrete.
• It can be applied to all structurally sound concrete, whether old or new.
• Active components present in the watertight concrete reactivates upon impact with the water.
• Treated concrete is completely watertight after 5 days.
• Highly resistant to deicing salts, sulphuric acid, and hydrochloric acid during at least 35 days.
• Shields concrete and reinforcement from corrosion due to water.

Yield: 1.6 kg/m²/1mm thickness

MIXING

If the use of masonry brush is the application method, mix 7-7.5 liters of water with 25kg of Vetoproof CM741, while when using a power-spray gun, prepare a mixture of 8 – 8.5 liters of water with 25kg of the product.

Mix only as much product as necessary and ensure to stir the mixture regularly. If the mixture starts to set, it is not advisable to add more water; instead, re-stir the prepared mixture to reinstate its workability.

APPLICATION

Apply Vetoproof CM741 into two coats with the use of a masonry brush or power-spray gun. Make sure to apply the second coat while the first coat is still “green.”

Keep all areas where Vetoproof CM741 is applied damp, protected against direct exposure from sunlight, wind, and frost by covering the area with polythene sheeting, damp hessian cloth, etc., for a period of 5-7 days.

Ensure that the period between applying the first and second layer is between 3 – 4 hours at a temperature of 20°C