-
Flowflex Brass Compression Gate Valves
Flowflex Gate valves are installed in systems to isolate flow, and should not be used as control or regulating valves. By turning the stem, the gate inside the valve moves up and down to either interrupt or facilitate the flow of the system.
Gate valves are typically chosen where minimum pressure loss is required, as when fully open, there is very little to interrupt flow. Furthermore, and advantage of using a Gate Valve is that its slow process of closing mitigates the effects of water hammer in your system.
-
-
Vetotouch Color Plaster Cementitious Coatings & Finishes Range
CEMENTITIOUS POLYMER MODIFIED DECORATIVE TEXTURED FINISH COAT FOR EXTERIOR AND INTERIOR APPLICATIONS
Saveto manufactures a high range of cementitious decorative special finish effects and textures products designed for interior and exterior building facades, with a wide color range that meets the client taste. As a finish coat, Saveto Decorative Coatings can be applied on Plastered, Fair Faced concrete substrates and Pre-cast panels. SAVETO Decorative coatings are an excellent choice as a finish coat for EIFS / ETICS systems.
Factory controlled pre-blend ensures the consistent high quality of Saveto Decorative Coatings. Easiness in application, with uniform work flow enable a high productivity and superior finishing. Saveto Decorative Coatings improved workability, curing, and strong adhesion on variety of substrates. Weather resistant and UV stable pigment properties, which provides resistance to fading and eliminates need for additional paint, classified Saveto Decorative Coating to be on the first choice for Façade design.
Packaging: Supplied in 50kg bags (except Serene – Soft: 25kg/bag)
Vetotouch Color Plaster comes in a wide range of designs all with a range of colors.
To select your desired range option:
1. Select your color preference.
2. Select your material harshness preference (soft, medium, harsh).
3. Select the required quantity for your targeted sqm area.
4. Instruct the Plaster Mason / Plasterer on your desired pattern for the material and color selected.
ر.س 4.30 excl. TaxVetotouch Color Plaster Cementitious Coatings & Finishes Range
ر.س 4.30 excl. Tax -
Shattaf – Brass
Trigger spray shower set consisting of brass trigger spray With maximum 4 lt/min flow rate (integrated regulator), ABS fixed wall bracket and 1250 mm double clenched hose, brass trigger control handle, chrome.
ر.س 22.40 excl. TaxShattaf – Brass
ر.س 22.40 excl. Tax -
BB2 Wall Tie
Catnic wall ties are manufactured from high quality stainless steel wire in accordance with BS EN 10088-2-1.4301 (strip), BS EN 10088-3:2005 min 18/8 composition wire (wire)
-
-
SS – Angle Bead
Designed for two and three coat applications, Standard Angle Bead forms strong and accurate corners resistant to chipping and cracking. Available in Galvanised Steel for internal applications and available in Stainless Steel for external use and high condensation and moisture areas.
ر.س 2.50 excl. TaxSS – Angle Bead
ر.س 2.50 excl. Tax -
GI – Angle Bead
A Catnic angle bead form strong accurate corners which are resistant to chipping cracking whilst providing strength protection against everyday knocks. A Catnic angle bead will help to protect and reinforce plaster where it is most vulnerable.
The Catnic angle bead range on offer have been designed for both internal use and outer plaster uses, manufactured from quality galvanized steel sheet, expanded or perforated mesh.
ر.س 0.65 excl. TaxGI – Angle Bead
ر.س 0.65 excl. Tax -
Pre Mix Plasters – Conmix CP 2
CP2 is a dry pre mix, cement plaster/render for internal and external use. This cement plaster is an ideal substrate for paint, wallpaper or decorative plasters. CP2 can be applied with a suitable plastering machine or by hand in accordance to BSEN 13914-1 & 2 onto prepared concrete surface, block work as well as most mineral backgrounds
Available Colors: GREY ر.س 1.65 excl. TaxPre Mix Plasters – Conmix CP 2
ر.س 1.65 excl. Tax -
Tile Adhesive C-800(M)
C800 (M) is a dry pre mix, water resistant, cement based thin bed adhesive for the fixing granite, vitrified tiles, glass mosaic, glass bricks, and ceramic wall and floor tiles. It is suitable for internal and external use and complies to ANSI A 118.4:2005 and BS EN 12004:2017. C800 (M) has a long open time with excellent adhesion and workability. It consists of White Portland cement, oven dried, processed sand and chemical additives including vinyl acetate/ethylene copolymer redispersible powder.
Available Colors: GREY ر.س 3.53 excl. TaxTile Adhesive C-800(M)
ر.س 3.53 excl. Tax