-
Circular Valve Box by Rain Bird
When it comes to irrigation system installation and design, valve boxes play an important role, yet aren’t often given much thought. Rain Bird manufactures and distributes valve boxes for protecting installed solenoid valves within an irrigation system. From reinforced walls and bottom flanges to skid-resistant lids, Rain Bird’s valve boxes are manufactured to exacting standards, using quality materials rigorously tested for durability.
-
Bermad C 70 Combination Side Outlet Air Valve
BERMAD C70 is a high quality combination air valve for a variety of water networks and operating conditions.
It evacuates air during pipeline filling, allows efficient release of air pockets from pressurized pipes, and enables large volume air intake in the event of network draining.
With its advanced aerodynamic design, double orifice and anti-slam / slow closing device, this valve provides excellent protection again air accumulation, vacuum formation and pressure surges, with improved sealing in low pressure conditions. The valve minimizes water spraying during air release.
ر.س 75.00 excl. TaxBermad C 70 Combination Side Outlet Air Valve
ر.س 75.00 excl. Tax -
Flowflex Brass Compression Gate Valves
Flowflex Gate valves are installed in systems to isolate flow, and should not be used as control or regulating valves. By turning the stem, the gate inside the valve moves up and down to either interrupt or facilitate the flow of the system.
Gate valves are typically chosen where minimum pressure loss is required, as when fully open, there is very little to interrupt flow. Furthermore, and advantage of using a Gate Valve is that its slow process of closing mitigates the effects of water hammer in your system.
-
Vetotouch Color Plaster Cementitious Coatings & Finishes Range
CEMENTITIOUS POLYMER MODIFIED DECORATIVE TEXTURED FINISH COAT FOR EXTERIOR AND INTERIOR APPLICATIONS
Saveto manufactures a high range of cementitious decorative special finish effects and textures products designed for interior and exterior building facades, with a wide color range that meets the client taste. As a finish coat, Saveto Decorative Coatings can be applied on Plastered, Fair Faced concrete substrates and Pre-cast panels. SAVETO Decorative coatings are an excellent choice as a finish coat for EIFS / ETICS systems.
Factory controlled pre-blend ensures the consistent high quality of Saveto Decorative Coatings. Easiness in application, with uniform work flow enable a high productivity and superior finishing. Saveto Decorative Coatings improved workability, curing, and strong adhesion on variety of substrates. Weather resistant and UV stable pigment properties, which provides resistance to fading and eliminates need for additional paint, classified Saveto Decorative Coating to be on the first choice for Façade design.
Packaging: Supplied in 50kg bags (except Serene – Soft: 25kg/bag)
Vetotouch Color Plaster comes in a wide range of designs all with a range of colors.
To select your desired range option:
1. Select your color preference.
2. Select your material harshness preference (soft, medium, harsh).
3. Select the required quantity for your targeted sqm area.
4. Instruct the Plaster Mason / Plasterer on your desired pattern for the material and color selected.
ر.س 4.30 excl. TaxVetotouch Color Plaster Cementitious Coatings & Finishes Range
ر.س 4.30 excl. Tax -
SS Metal Lath
Expanded metal lath is extensively used as a background to plaster in order to reinforce against cracks and it is especially useful at joints of dissimilar materials.
Generally DL111 or DL089 lath is used for wall situations and DL161 is used for ceiling work.
ر.س 14.50 excl. TaxSS Metal Lath
ر.س 14.50 excl. Tax -
GI Metal Lath
Expanded metal lath is extensively used as a background to plaster in order to reinforce against cracks and it is especially useful at joints of dissimilar materials. Generally DL111 or DL089 lath is used for wall situations and DL161 is used for ceiling work.
Available Colors : GALVANISED ر.س 2.75 excl. TaxGI Metal Lath
ر.س 2.75 excl. Tax -
BB2 Wall Tie
Catnic wall ties are manufactured from high quality stainless steel wire in accordance with BS EN 10088-2-1.4301 (strip), BS EN 10088-3:2005 min 18/8 composition wire (wire)
-
-
SS – Angle Bead
Designed for two and three coat applications, Standard Angle Bead forms strong and accurate corners resistant to chipping and cracking. Available in Galvanised Steel for internal applications and available in Stainless Steel for external use and high condensation and moisture areas.
ر.س 2.50 excl. TaxSS – Angle Bead
ر.س 2.50 excl. Tax -
GI – Angle Bead
A Catnic angle bead form strong accurate corners which are resistant to chipping cracking whilst providing strength protection against everyday knocks. A Catnic angle bead will help to protect and reinforce plaster where it is most vulnerable.
The Catnic angle bead range on offer have been designed for both internal use and outer plaster uses, manufactured from quality galvanized steel sheet, expanded or perforated mesh.
ر.س 0.65 excl. TaxGI – Angle Bead
ر.س 0.65 excl. Tax -
ر.س 8.50 – ر.س 9.50 excl. Tax
Vetotile Bond Strong Adhesive for Installing Tiles the Traditional Way
ر.س 8.50 – ر.س 9.50 excl. Tax -
Spatter Dash SB Internal & External Scratch Coat For Plasters
Spatter Dash CB a cement-based coat composed of hydraulic binders, selected aggregates, and high-performance additives. It is supplied as a dry powder in pre-weighed bags ready to use on-site, which requires only the addition of clean water to produce easily workable mortar. Spatter Dash CB is a high-quality product for applications on cement board and non absorbing surfaces and ceilings.
Spatter Dash SB is supplied in 50Kg Bag.
ر.س 3.50ر.س 4.00excl. TaxSpatter Dash SB Internal & External Scratch Coat For Plasters
ر.س 3.50ر.س 4.00excl. Tax
Newsletter
Subscribe to get information about products and coupons
© 2023 Nabni.com | All Rights Reserved
We provide safe payment options