-
Bermad C 70 Combination Side Outlet Air Valve
BERMAD C70 is a high quality combination air valve for a variety of water networks and operating conditions.
It evacuates air during pipeline filling, allows efficient release of air pockets from pressurized pipes, and enables large volume air intake in the event of network draining.
With its advanced aerodynamic design, double orifice and anti-slam / slow closing device, this valve provides excellent protection again air accumulation, vacuum formation and pressure surges, with improved sealing in low pressure conditions. The valve minimizes water spraying during air release.
ر.س 75.00 excl. TaxBermad C 70 Combination Side Outlet Air Valve
ر.س 75.00 excl. Tax -
Flowflex Brass Compression Gate Valves
Flowflex Gate valves are installed in systems to isolate flow, and should not be used as control or regulating valves. By turning the stem, the gate inside the valve moves up and down to either interrupt or facilitate the flow of the system.
Gate valves are typically chosen where minimum pressure loss is required, as when fully open, there is very little to interrupt flow. Furthermore, and advantage of using a Gate Valve is that its slow process of closing mitigates the effects of water hammer in your system.
-
ر.س 0.15 excl. TaxIrrigation Drip-Loc Joiners 13mm
ر.س 0.15 excl. Tax -
Irrigation Dripe Fittings Drip-Loc® GTO PE 13MM
The Drip-Loc® range of fittings have been specifically designed to suit a range of low density polyethylene tube sizes.
The fittings come complete with locking rings to ensure positive polyethylene connections.ر.س 0.33 excl. TaxIrrigation Dripe Fittings Drip-Loc® GTO PE 13MM
ر.س 0.33 excl. Tax -
SS Metal Lath
Expanded metal lath is extensively used as a background to plaster in order to reinforce against cracks and it is especially useful at joints of dissimilar materials.
Generally DL111 or DL089 lath is used for wall situations and DL161 is used for ceiling work.
ر.س 14.50 excl. TaxSS Metal Lath
ر.س 14.50 excl. Tax -
GI Metal Lath
Expanded metal lath is extensively used as a background to plaster in order to reinforce against cracks and it is especially useful at joints of dissimilar materials. Generally DL111 or DL089 lath is used for wall situations and DL161 is used for ceiling work.
Available Colors : GALVANISED ر.س 2.75 excl. TaxGI Metal Lath
ر.س 2.75 excl. Tax -
BB2 Wall Tie
Catnic wall ties are manufactured from high quality stainless steel wire in accordance with BS EN 10088-2-1.4301 (strip), BS EN 10088-3:2005 min 18/8 composition wire (wire)
-
-
SS – Angle Bead
Designed for two and three coat applications, Standard Angle Bead forms strong and accurate corners resistant to chipping and cracking. Available in Galvanised Steel for internal applications and available in Stainless Steel for external use and high condensation and moisture areas.
ر.س 2.50 excl. TaxSS – Angle Bead
ر.س 2.50 excl. Tax -
GI – Angle Bead
A Catnic angle bead form strong accurate corners which are resistant to chipping cracking whilst providing strength protection against everyday knocks. A Catnic angle bead will help to protect and reinforce plaster where it is most vulnerable.
The Catnic angle bead range on offer have been designed for both internal use and outer plaster uses, manufactured from quality galvanized steel sheet, expanded or perforated mesh.
ر.س 0.65 excl. TaxGI – Angle Bead
ر.س 0.65 excl. Tax
Newsletter
Subscribe to get information about products and coupons
© 2023 Nabni.com | All Rights Reserved
We provide safe payment options