-
Flowflex Brass Compression Gate Valves
Flowflex Gate valves are installed in systems to isolate flow, and should not be used as control or regulating valves. By turning the stem, the gate inside the valve moves up and down to either interrupt or facilitate the flow of the system.
Gate valves are typically chosen where minimum pressure loss is required, as when fully open, there is very little to interrupt flow. Furthermore, and advantage of using a Gate Valve is that its slow process of closing mitigates the effects of water hammer in your system.
-
SS Metal Lath
Expanded metal lath is extensively used as a background to plaster in order to reinforce against cracks and it is especially useful at joints of dissimilar materials.
Generally DL111 or DL089 lath is used for wall situations and DL161 is used for ceiling work.
ر.س 14.50 excl. TaxSS Metal Lath
ر.س 14.50 excl. Tax -
GI Metal Lath
Expanded metal lath is extensively used as a background to plaster in order to reinforce against cracks and it is especially useful at joints of dissimilar materials. Generally DL111 or DL089 lath is used for wall situations and DL161 is used for ceiling work.
Available Colors : GALVANISED ر.س 2.75 excl. TaxGI Metal Lath
ر.س 2.75 excl. Tax -
BB2 Wall Tie
Catnic wall ties are manufactured from high quality stainless steel wire in accordance with BS EN 10088-2-1.4301 (strip), BS EN 10088-3:2005 min 18/8 composition wire (wire)
-
-
SS – Angle Bead
Designed for two and three coat applications, Standard Angle Bead forms strong and accurate corners resistant to chipping and cracking. Available in Galvanised Steel for internal applications and available in Stainless Steel for external use and high condensation and moisture areas.
ر.س 2.50 excl. TaxSS – Angle Bead
ر.س 2.50 excl. Tax -
GI – Angle Bead
A Catnic angle bead form strong accurate corners which are resistant to chipping cracking whilst providing strength protection against everyday knocks. A Catnic angle bead will help to protect and reinforce plaster where it is most vulnerable.
The Catnic angle bead range on offer have been designed for both internal use and outer plaster uses, manufactured from quality galvanized steel sheet, expanded or perforated mesh.
ر.س 0.65 excl. TaxGI – Angle Bead
ر.س 0.65 excl. Tax -
Kembla PVC Coated Cop Tube
MM Kembla has been providing our customers with the highest quality and most reliable products and services for over 100 years. Established in 1916, MM Kembla is Australia’s only copper tube manufacturer. Still operating from its original site at Port Kemble, NSW Australia, MM Kembla remains the most highly regarded supplier of copper products including tube, fittings end accessories. Extensive technical knowledge combined with stringent in-louse quality controls and testing with an ISO 9001 certified quality management system, MM Kembla has developed a renowned reputation for quality, reliability and service.
-
Crane Plain Copper Tube
Crane copper tube is manufactured to BSEN1057 standards using the highest grade raw materials and modern extruding and drawing technology to provide superior products for water, gas and waste in domestic, commercial and industrial applications.
Available Colors : WHITE -
Crane Polylag Cop Tube
Crane copper tube is manufactured to BSEN1057 standards using the highest grade raw materials and modern extruding and drawing technology to provide superior products for water, gas and waste in domestic, commercial and industrial applications.
Available Colors : WHITE
Newsletter
Subscribe to get information about products and coupons
© 2023 Nabni.com | All Rights Reserved
We provide safe payment options
