-
Flowflex Brass Compression Gate Valves
Flowflex Gate valves are installed in systems to isolate flow, and should not be used as control or regulating valves. By turning the stem, the gate inside the valve moves up and down to either interrupt or facilitate the flow of the system.
Gate valves are typically chosen where minimum pressure loss is required, as when fully open, there is very little to interrupt flow. Furthermore, and advantage of using a Gate Valve is that its slow process of closing mitigates the effects of water hammer in your system.
-
Shattaf – Plastic
IdealSpray trigger spray shower set consisting of ABS (plastic) trigger spray, with maximum 7.6 lt/min flow rate (integrated regulator),trigger control handle, ABS fixed wall bracket and 1250 mm double clenched hose, chrome.
ر.س 9.90 excl. TaxShattaf – Plastic
ر.س 9.90 excl. Tax -
Shattaf – Brass
Trigger spray shower set consisting of brass trigger spray With maximum 4 lt/min flow rate (integrated regulator), ABS fixed wall bracket and 1250 mm double clenched hose, brass trigger control handle, chrome.
ر.س 22.40 excl. TaxShattaf – Brass
ر.س 22.40 excl. Tax -
Pre Mix Plasters – Conmix CP 2
CP2 is a dry pre mix, cement plaster/render for internal and external use. This cement plaster is an ideal substrate for paint, wallpaper or decorative plasters. CP2 can be applied with a suitable plastering machine or by hand in accordance to BSEN 13914-1 & 2 onto prepared concrete surface, block work as well as most mineral backgrounds
Available Colors: GREY ر.س 1.65 excl. TaxPre Mix Plasters – Conmix CP 2
ر.س 1.65 excl. Tax -
Tile Adhesive C-500
C500 is a cement based water resistant tile adhesive with fast setting, quick strength and self curing properties. It contains special chemicals including re-dispersible polymers. It is suitable for fixing wall and floor tiles. It provides excellent adhesion, good mechanical strength and can be used for internal and external applications. It can be used on ceramic tiles (group IIIBS5385-1:2009) having water absorption (E) more than 10% (E>10%). C500 white is advised to be used on stain prominent tiles.
Available Colors: GREY -
Tile Adhesive C-800(M)
C800 (M) is a dry pre mix, water resistant, cement based thin bed adhesive for the fixing granite, vitrified tiles, glass mosaic, glass bricks, and ceramic wall and floor tiles. It is suitable for internal and external use and complies to ANSI A 118.4:2005 and BS EN 12004:2017. C800 (M) has a long open time with excellent adhesion and workability. It consists of White Portland cement, oven dried, processed sand and chemical additives including vinyl acetate/ethylene copolymer redispersible powder.
Available Colors: GREY ر.س 3.53 excl. TaxTile Adhesive C-800(M)
ر.س 3.53 excl. Tax