Decorative Finishing Color Plaster – Vetotouch Tyrolean
In stock
Vetotouch Tyrolean is a cement-based decorative finish composed of hydraulic binders, selected aggregates, and special additives. It is supplied as a dry powder in pre-weighed bags ready to use on-site, which requires only the addition of clean water to produce easily workable mortar.
ر.س 4.30 excl. Tax
Vetotouch Tyrolean is a cement-based decorative finish composed of hydraulic binders, selected aggregates, and special additives. It is supplied as a dry powder in pre-weighed bags ready to use on-site, which requires only the addition of clean water to produce easily workable mortar.
- Factory-controlled pre-blend ensures consistently high quality.
- Requires only the addition of water on-site at the time of usage.
- Provides textured and stenciled finishes.
- Improved workability and curing
- Easy application with uniform workflow enables high productivity and superior finishing.
- Strong adhesion on a variety of substrates.
- Internal and external applications.
- Weather-resistant.
- UV stable pigment provides resistance to fading and eliminates the need for additional paint.
- Suitable for humid and dry conditions.
Mixing
Add to the mixing container 7-8 liters of water for each 25kg bag of Vetotouch Tyrolean. Add the powder to the water and mix with a mechanical plaster mixer or low-speed heavy-duty electric drill fitted with a suitable paddle for 3-4 minutes until achieving a uniform, lump-free consistency. Leave the mixed material to stand for 10min and briefly remix without adding water.
For small batch quantities, mix the product manually for approx. 1-2 min or when achieving a homogeneous. Add 0.5 to 1.0 liter of Vetobond AB432 to the mixing water and adjust the water requirement accordingly for each 25kg bag. Follow the same mixing procedure as described above.
Use the mixed material within 30-60 minutes.
Do not add water once the mixed mortar starts to harden.
Application
Apply Vetotouch Tyrolean in one or two layers up to 6mm/coat. Apply by hopper Gun or by Terol hand-operated machine.
To protect Vetotouch Tyrolean, apply Vetoseal XX772 by brush or spray machine after three days of curing.
Curing
It is vital to cure Vetotouch Tyrolean surface with clean potable water 2 times a day for 3 days. During hot and dry conditions, extend the curing period for a minimum of 5-7 days. It will help to obtain high physical properties. An acrylic-based curing compound can be used.
To protect the final color look, it is recommended to apply one coat of Saveto Vetoseal product range (contact the technical department for advice).
Cleaning
Clean tools with water before the mortar hardens. After the hardening, remove its residuals mechanically only.
-
Vetonit Putty WR High Quality Water Resistant Ex/In Putty to Repair Surface Undulations
Sold By: The White Blocksر.س 4.00 excl. TaxSold By: The White BlocksVetonit Putty WR High Quality Water Resistant Ex/In Putty to Repair Surface Undulations
ر.س 4.00 excl. Tax -
Neofil F7 High Performance Water Resistant Ceramic Tile Adhesive for Internal Applications
Sold By: The White Blocksر.س 2.50 excl. TaxSold By: The White BlocksNeofil F7 High Performance Water Resistant Ceramic Tile Adhesive for Internal Applications
ر.س 2.50 excl. Tax -
Neofil Color Smooth Waterproof Crack-Free Non-Shrinkage Grout For Sealing Int/Ext Floor/Wall Joints
Sold By: The White Blocksر.س 2.50ر.س 3.00excl. TaxSold By: The White BlocksNeofil Color Smooth Waterproof Crack-Free Non-Shrinkage Grout For Sealing Int/Ext Floor/Wall Joints
ر.س 2.50ر.س 3.00excl. Tax
-
ر.س 3.00 excl. Tax
-
ر.س 75.00 excl. Tax
-
ر.س 0.18 excl. Tax
-
ر.س 0.10 excl. Tax
-
ر.س 0.15 excl. Tax
-
ر.س 0.10 excl. Tax
-
ر.س 0.33 excl. Tax
-
ر.س 35.00 excl. TaxSold By: Muna Noor
1.5 Inch Pelican Rain Gun Irrigation Sprinkler, Model No.: HT-42G
ر.س 35.00 excl. Tax -
ر.س 14.00 excl. Tax
Reviews
There are no reviews yet.